Skip to main content

Taulman 645 Nylon 3D Printer Filament


Taulman 645 Nylon 3D Printer Filament

Taulman 645 Nylon 3D Printer Filament
Item# Taulman645
Regular Price: $49.95
MakerGeeks Price: $35.99
1kg: 
Availability: Usually ships the next business day

MakerGeeks Description

Current usage for 3D Printing:

The following come from the efforts of just a few Printer Operators.  As noted, in the 645 Samples page, taulman is working to dramatically enhance the available usage and processes information to the end user.
  • NOTE: Current 645 measures 1.76mm to 1.83mm dia in a slightly oval shape due to the draw and cooling process.  The line cross-section is constant, however users should make a slight adjustment to their "Material Dia" (1.78mm - 1.80mm) settings to accommodate this slight variance.
  • Layer Height = Any
  • Speed - 645 has a slightly higher viscosity than other printing materials.  As the layer height exceeds 50% of the nozzle dia, printing speed should be adjusted downward ~10% - 20%
  • Retraction - again, due to a slightly higher viscosity, the retraction distance may need to be lengthened.
  • Excessive bubbles in the printed thread are an indication of a higher than required print temperature.
  • Reducing Print temperature below 238 will result in less thread opacity due to recombination with the atmosphere, however this will also reduce bonding in layers exceeding 25% of nozzle dia.
  • Shrinkage is equal to ABS and can be controlled using garolite (LE) as a print table cover/plate
  • Heated beds help just as they do for printing with ABS
  • Printing a larger amount of material for the first layer of a print on garolite will make the printed part extremely difficult to remove.
  • While printing with a higher infill percentage will make a stronger part, it is probably not required.  When we exceed 50% fill, it no longer provides any noticeable benefits other than optical.
645 Nylon Co-Polymer consists of the purest form of a delta transition of Nylon 6/9, Nylon 6 and Nylon 6T with a crystallinity optimization process in addition to post processing for maximum bonding during a thermal transition (3D Printing).

Construction = From granule form through nylon extruding systems to a 12 station extrusion to draw, 4 chiller loops with 2 post processing stations to a final draw of 3mm or 1.75mm round line.
  • Processing base purity = maximum available with current base chemistry.
  • Processing additives = none
  • Color additives = none
  • UV inhibitor additives = none – reduced susceptibility based on optical clarity/reflection.
  • Flame Retardant additives = none
  • Expected Tensile Strength, Yield = 16,533 psi
  • Expected Elongation at Break =120 %
  • Melt temperature = 194C
  • Print Temperature = 230C – 265C
  • Pyrolysis Temperature = 330C
  • Color = none
  • Crystallinity optimization = maximum allowable to a 50% tear/ 50% break (when printed)
  • Expected Optical Properties = true reflective, true absorption, optically correct for cylindrical thread/line.
  • Expected Opacity = <5% - currently unmeasured

Physical Properties        Metric                        English                    Comments
Density                            ********                       *********                    ISO 1183-A
Water Absorption                  *******           *************                      ISO METHOD 62
 
Mechanical Properties    Metric                       English                   Comments
Tensile Strength, Yield     ***********               ***********               ISO METHOD 527
Elongation at Break          ***********               ***********             ISO METHOD 527
Flexural Modulus                 **********           *********                    ISO METHOD 178
Flexural Yield Strength     ***********              ***********                ISO METHOD 178
Izod Impact, Notched        *************             ************           ISO METHOD 180
 
Thermal Properties        Metric                        English                    Comments
Melting Point                        194 °C                      381 °F                     ISO METHOD 3146C
Glass Transition Temp     ******°C. 
Heat Deflection Temp at **** psi               ************         °F      D648
 
Processing Properties    Metric                      
Print Temperature               230 - 265 °C     -    Part and printer dependent.
Pyrolysis                            330 - 360 °C
UV                                      There are no UV Inhibitors within 645 as they reduce bonding

Safety                                 645 meets the EU's "REACH" requirements as defined by the ECHA European Chemicals                                                     Agency.  There are NO additives or chemicals in 645 that are listed in the REACH Directive.

645 Contains NO toxic chemicals.  
As with all 3D Printing using heated polymers, Caution should be used so as NOT to come into
 contact with the molten 645 (194C+) as it will adhere to ALL cellulose surfaces, including skin.

         Again, just hit "Print"!

We have received confirmation emails from individual "users" that the following printers have had no issue printing 618 with only adding garolite, tape or wood to the print table:

  • Makerbot Replicator I
  • Makerbot Replicator II
  • Makerbot Replicator I Dual Ext
  • Makerbot Replicator II Dual Ext
  • PrintrBot
  • PrintrBot Plus
  • Ultimaker
  • TOM
  • Cupcake
  • CB Printer
  • MakeMendel
  • Rostock SeeMeCNC
  • 2BEIGH3
  • BukoBot
  • 3D Touch Dual Head
  • Mendel
  • Lulzbot
  • inDimension3
  • Mendel Max
  • Makergear
  • RepRap
  • RepRap Pro
  • Rostock
  • Cerberus
  • UP
  • Bits from Bites
  • Afinia
  • Robot Factory
  • PowerWasp
  • RoboBot

3D Printer Filament, 3D Printer supplies

Print Happy @ MakerGeeks.com

Check out these super epic Maker Deals!!

  • Greg's Wade Geared Extruder Printed Parts for only $23.55 (+ free shipping!) click here
  • Insanely Bright PLA Nuclear Geen PLA for only $35.95 (+ FREE shipping) click here
  • Prusa Mendel RepRap Printed Parts Kit - Only $71.24 your choice of 38+ colors! click here
  • Don't forget your FREE 8bit Owl Sticker - we'll send you ONE for free, just email us! click here

Comments

Popular posts from this blog

Comparison of Flexible 3D Printer Filament - Ninja Flex vs Maker Flex

Comparison of Flexible 3D Printer Filament - Ninja Flex vs Maker FlexMAKER FLEX
FLEXIBLE 3D PRINTER FILAMENT FINALLY AN ALTERNATIVE TO NINJAFLEX THAT'S MADE IN THE USA! 
THE MAKER FLEX DIFFERENCE: Trade-marked high-strength engineering grade flexible resinShore Hardness of 40 (Rubber Band Soft feel)Polyester-based thermoplastic elastomer (TPEE)UV StableWater tight and stable for underwater applicationsStyrene-freeBPA FreeFDA Compliant for Food contact1KG Spool (2.20lbs)(Dimensional Accuracy +/- 0.05mm)Low to NO odorNear zero warp-age or shrinkageVacuumed Sealed With DesiccantLow moisture absorption Sourced and Manufactured in the USAAffordable - we make it, you save big!! Spool Diameter: 7.94" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2" Maker Flex series of 3D printing filaments are a polyester-based thermoplastic elastomer (TPEE). Maker Flex is an engineering elastomer combining the properties of rubbers and engineering plastics, thus bridging the gap between …

News from the Maker Desk

News from the Maker Desk
Happy Monday to you... hope you are doing great today; wanted to share something that was on my heart this morning about MakerGeeks and what’s going on and what the next steps are for us.

Almost 3 years ago we started selling 3D Printer filament(all of it from China) and over the next 2 years saw a booming business come out of those items; reselling filaments from China, Germany and the Netherlands. About a year and a half ago we started with a single extruder and a dream to start making 3D printer filament in bulk scale here on US soil… back then I thought that 1 extruder and me working part time would make more filament than I could sell in a life-time. Well, within just a few months we had bought another extrusion line and hired our first full time operator just to keep up with demand.

Now, surly we would have enough filament to last a life-time; NOPE… in just a few more months we added another extrusion line and lots and lots of overtime and weekends. Now we…

How to Use Ninja Flex PLA on a MakerBot Replicator 3D Printer

How to Use Ninja Flex PLA on a MakerBot Replicator 3D Printer

NinjaFlex's unique flexibility and smooth feeding characteristics enable you to create in ways you never thought possible. Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts. Features: Filament shore hardness of approximately 85AConsistent diameter and material properties provide reliable, high quality printsPatent pending technology allows for smooth feedingLow tack, low CoF exterior allows smooth feed through filament guidesHigh elasticity and excellent abrasion resistanceExcellent build platform adhesion and bonding between layersREACH and RoHS 2002/95/EC Directive Compliant1.75mm filament spool = .50 kg3.00mm filament spool = .75 kgProcessing Guidelines: Re…