Skip to main content

J-Head MKIV Hotend for RepRap 3D Printers


J-Head MKIV Hotend for RepRap 3D Printers

J-Head MKIV Hotend for RepRap 3D Printers
Item# JHEAD
Regular Price: $99.95
MakerGeeks Price: $53.95
J-Head: 
Availability: Usually ships the next business day

MakerGeeks Description

This nozzle is a combination of ideas from other nozzle designs combined with a goal to reduce the number of custom machined parts to a bare minimum. By reducing the number of machined parts, it is hoped that the cost of this hot-end can be kept down while improving the reliability.The use of a machined piece of round PTFE, as a liner, was requested in one of two designs by Brian Briggs.

The idea of using the PTFE tubing as a liner, from the Cold End to the tip, was borrowed from the Makerbot Mk V extruder design. The PTFE tubing also acts to "bridge" the joint between the PEEK insulator and the brass nozzle/heater. By not having the filament in contact with this joint it is hoped that any possibility of leakage will be completely eliminated.

The use of a combination heater and nozzle was borrowed from ParCan's Inline Heater Nozzle Variation. However, instead of the heater resistor being mounted parallel to the path of the filament it is mounted perpendicular to the path of the filament. This was done to both reduce the length of the nozzle and to make it a little easier to run the leads from the heater resistor. Combining the heater and nozzle also helped to meet the goal to keep the number of custom machined parts to a minimum.

J-Head MKIV Hotend Advantages:
  • Internally, the filament path is identical to that of an already proven design.
  • The design is simple as the number of custom machined parts is kept to a minimum.
  • If necessary, the PTFE liner can be replaced by using an off-the-shelf piece of PTFE tubing.
  • The PTFE is not stressed nor used to provide support. This reduces a point of failure that is part of other designs.
  • A resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.
  • Heat transmission is improved as there is no thermal junction where a separate heater screws onto the nozzle.
  • With most versions weighing in at under 25 grams and the lightest version weighing in at under 13 grams, this design is very light.
Each MakerGeeks.com J-Head MKIV Hotend Includes: 
  • 1    J-Head Nozzle (v1.x)    Machined Brass Nozzle/Heater Combination, Version 1.x   
  • 1    Nozzle Holder (v4)    Machined PEEK Nozzle Holder, Version 4   
  • 1    PTFE liner (v1)    1/8" ID, 1/4" OD PTFE tubing, Version 1
  • 1    Heater Resistor    Axial, 5.6 ohm, 1%, 5W    UB5C-5.6-ND
  • 1    Thermistor 1    EPCOS 100K    B57560G104F
  • 1    Hollow-lock socket set screw    5/16-24 hollow-lock socket set screw  

3D Printer Filament, 3D Printer supplies

Print Happy @ MakerGeeks.com

Check out these super epic Maker Deals!!

  • Greg's Wade Geared Extruder Printed Parts for only $23.55 (+ free shipping!) click here
  • Insanely Bright PLA Nuclear Geen PLA for only $35.95 (+ FREE shipping) click here
  • Prusa Mendel RepRap Printed Parts Kit - Only $71.24 your choice of 38+ colors! click here
  • Don't forget your FREE 8bit Owl Sticker - we'll send you ONE for free, just email us! click here

Comments

Popular posts from this blog

Comparison of Flexible 3D Printer Filament - Ninja Flex vs Maker Flex

Comparison of Flexible 3D Printer Filament - Ninja Flex vs Maker FlexMAKER FLEX
FLEXIBLE 3D PRINTER FILAMENT FINALLY AN ALTERNATIVE TO NINJAFLEX THAT'S MADE IN THE USA! 
THE MAKER FLEX DIFFERENCE: Trade-marked high-strength engineering grade flexible resinShore Hardness of 40 (Rubber Band Soft feel)Polyester-based thermoplastic elastomer (TPEE)UV StableWater tight and stable for underwater applicationsStyrene-freeBPA FreeFDA Compliant for Food contact1KG Spool (2.20lbs)(Dimensional Accuracy +/- 0.05mm)Low to NO odorNear zero warp-age or shrinkageVacuumed Sealed With DesiccantLow moisture absorption Sourced and Manufactured in the USAAffordable - we make it, you save big!! Spool Diameter: 7.94" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2" Maker Flex series of 3D printing filaments are a polyester-based thermoplastic elastomer (TPEE). Maker Flex is an engineering elastomer combining the properties of rubbers and engineering plastics, thus bridging the gap between …

How to Use Ninja Flex PLA on a MakerBot Replicator 3D Printer

How to Use Ninja Flex PLA on a MakerBot Replicator 3D Printer

NinjaFlex's unique flexibility and smooth feeding characteristics enable you to create in ways you never thought possible. Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts. Features: Filament shore hardness of approximately 85AConsistent diameter and material properties provide reliable, high quality printsPatent pending technology allows for smooth feedingLow tack, low CoF exterior allows smooth feed through filament guidesHigh elasticity and excellent abrasion resistanceExcellent build platform adhesion and bonding between layersREACH and RoHS 2002/95/EC Directive Compliant1.75mm filament spool = .50 kg3.00mm filament spool = .75 kgProcessing Guidelines: Re…

Robot Track System Lawn Mower Build Pt: 1

RoBO Lawn-Mower So, I work at our church on the grounds team and my job is to use a push mower on the VERY steep hills around the main building; I would say there is about 2 acres of this extreme hills that need to be mowed every week. Whew... it's pretty rough sometimes!! Of course my inner-geek always comes out while I'm mowing and I think of how I could make it easier... well, what about having a robot do this for me!!

But what sort of robot could manage these hills and do a GOOD JOB of cutting God's grass... hummm...

I have been doodleing and drawing for about 6 months on this and finally started building last week!!

Here we go...



I had a small push mower that I had just bought so I was going to use that for my platform and started researching what sort of motors are best for robots and battle robots; and found that wheelchair motors are awesome work horses.

I found some on eBay for the Jazzy Pride 1 wheelchair, perfect!! I also found …